1，Determine the installation location: First, you need to determine the installation location of the solar mounting bracket, usually on a flat roof or on the ground. Make sure the installation location can fully receive sunlight and is free from obstructions.

2，Prepare bracket materials: According to the design requirements and installation location, prepare the required bracket materials, including bracket frames, support columns, connectors, etc.

3，Install the support column: According to the design requirements, fix the support column at the installation position, which can be fixed with bolts or concrete foundation. Make sure the support posts are plumb and stable.

Install the solar bracket frame: Connect the bracket frame to the support column and secure it with bolts or other connectors. Make sure the stand frame is flat and stable.

4，Install photovoltaic panels: Install the photovoltaic panels on the bracket frame and fix them with clamps or screws according to the design requirements. Make sure the photovoltaic panels are installed flat and stable.

5，Connect the cable: Connect the cable of the photovoltaic panel to the inverter or battery pack, making sure the cable connection is firm and safe.

6，Testing and debugging: After completing the installation, perform testing and debugging to ensure the normal operation of the photovoltaic system.

It should be noted that installing PV solar brackets requires professional engineering design and installation, and it is recommended to seek a professional installation team to operate. At the same time, pay attention to safety during installation and follow relevant safety operating procedures.

Please contact us for more solar mounting bracket install: info@sunforson.com