China’s NEA proposes significant solar feed-in tariff cuts for 2017 2016-09-30

                                                                  By Mark Osborne Sep 29, 2016 12:32 PM BST

solar mount PV structure

AECEA also noted that the potential severity in the FiT cuts came as a surprise in the distributed generation sector as this was recently considered to be favoured by the NEA in light of the utility-scale ground-mounted PV sector suffering from grid curtailment issues in several regions. Image: DuPont

China’s National Energy Administration (NEA) has published a draft version of proposed feed-in tariff (FiT) levels for ground mount and distributed generation PV power plants for 2017 that could lead to significant cuts to both sectors and overall curtailment of installations. 

In a client note, Asia Europe Clean Energy (Solar) Advisory Co. Ltd. (AECEA) noted that the FiT levels remained ‘unofficial’ and were only in 'draft' form as they were disseminated via various Chinese media outlets. 

Ground-mounted solar PV Power plants

Region 1: RMB 0.80 to 0.55 = minus 37% 
Region 2: RMB 0.88 to 0.65 = minus 25%
Region 3: RMB 0.98 to 0.75 = minus 23% 

Distributed Solar PV: 

Region 1: RMB 0.42 to 0.20 = minus 52%
Region 2: RMB 0.42 to 0.25 = minus 40%
Region 3: RMB 0.42 to 0.30 = minus 28%


However, without a major change the FiT cuts would potentially lower ROI (return on investment) levels significantly for PV project developers and therefore impact installations and demand throughout the supply chain. 

AECEA also noted that the potential severity in the FiT cuts came as a surprise in the distributed generation sector as this was recently considered to be favoured by the NEA in light of the utility-scale ground-mounted PV sector suffering from grid curtailment issues in several regions. 


hot products
  • Concrete base solar ground mounted

    SunRack Concrete Based Ground Mounting

    SunRack concrete base solar mounting is a highly versatile ground mounted solutions that can be widely applied in commercial and utility solar panel installation

  • carport mounting structure

    Solar Car Park Mounting System

    SunRack solar car parking solar rack mount can be designed as single row and double row two version. It adopts triangle supporting structure technology, which is very strong and secure.

  • Solar Panel Installation Mounting

    Solar Ballast Mounting System

    SunRack ballast mounting system adopts foldable triangular to save cost both on installation and transportation. Non-penetration to rooftop.

welcome to Sunforson
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
   

online service

home

products

about

contact