Advantages of Sunforson Floating Solar Mounting System 2019-08-26

With the development of photovoltaic industry, the land used for building photovoltaic power plants is becoming more and more scarce. At the same time, in view of the restrictions on the absorption and transmission of photovoltaic power grid, there are many types of photovoltaic power generation in the industry, which are different from the traditional surface photovoltaic power plants, mainly using HDPE floats for photovoltaic.

Sunforson floating photovoltaic solar mounting system has the following advantages:

1.Land conservation: land acquisition costs can be reduced by building on the water surface without occupying land resources.

2.Increasing power generation: Water has cooling effect on photovoltaic modules, which can restrain the rise of surface temperature of modules, and thus achieve higher power generation. According to the comparative analysis of the large-scale water photovoltaic power plant experiment in Hyogo Prefecture, Japan, due to the cooling effect of the water surface, the power generation capacity of the battery board increased by about 11%.

3.Reducing evaporation and algae reproduction: Covering solar panels on the water surface can theoretically reduce the amount of evaporation and inhibit algae reproduction in water, which is conducive to the protection of water resources.

4.Convenient operation and maintenance: Photovoltaic power plants built in water can reduce the pollution of dust on components, and facilitate the cleaning of components. At the same time, it is difficult for idle people and animals to access components, which can effectively prevent the destruction of components by personnel and animals.

5.Tourism benefits: The photovoltaic components arranged in a neat array on the vast water surface can be used as a unique scenic spot, become a landscape in the region, and bring tourism benefits.

6.Avoid component shading: Compared with land, the water surface is relatively open, which can effectively avoid the mountain, forest and other components of the shading, solar irradiation area is uniform and the light time is long.

7.Reduce the cost of tracking system: the angle and spacing of components are the same, which is convenient for the installation and operation of solar tracking system. It does not need to install a Dual-axis tracking system for each battery board, and greatly reduces the cost of tracking system.

8.Cost savings: No component foundation and support are needed, so the cost of foundation and support is saved and the cost is saved.


Here are our two usual structures. For more information, please visit www.sunforson.com.

floating pv solar mounting system

Floating Solar Mounting System

hot products
  • Concrete base solar ground mounted

    SunRack Concrete Based Ground Mounting

    SunRack concrete base solar mounting is a highly versatile ground mounted solutions that can be widely applied in commercial and utility solar panel installation

  • Solar Panel Installation Mounting

    Solar Ballast Mounting System

    SunRack ballast mounting system adopts foldable triangular to save cost both on installation and transportation. Non-penetration to rooftop.

  • carport mounting structure

    Solar Car Park Mounting System

    SunRack solar car parking solar rack mount can be designed as single row and double row two version. It adopts triangle supporting structure technology, which is very strong and secure.

welcome to Sunforson
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
   

online service

home

products

about

contact