1. In order to ensure the service life of the photovoltaic bracket during the installation of the solar mounting, the exposed metal embedded parts should be treated with anti-corrosion treatment before the installation of the mounting to avoid losing strength due to the corrosion of the mounting;

2. Galvanized parts meeting the requirements of national standards shall be used to fix the photovoltaic bracket when it is fastened with all efforts, so that the photovoltaic bracket can achieve the purpose of corrosion prevention and fastening during the installation process;

3. In order to ensure the installation quality of solar panel mounting, all bolts, nuts, flat washers and other configurations must meet the design requirements during the installation process, and the exposed part of bolts after installation should be 2/3 of that so far;

In order to better realize the good application of photovoltaic bracket during the installation process of photovoltaic mounting, the photovoltaic mounting manufacturer must do a good job in various installation precautions in order to ensure the good application between photovoltaic.

Welcome to contact us if any projects on hands need the support of solar mounting racks by info@sunforson.com.