SunRack adjustable pv Mounting System 2021-03-19

Sunforson engineering team is devoted to develop new solar mounting types to meet the demands for client demands.For a lower windy zone,there are some projects,which required a mounting solution with adjustable angle racks.


Sunforson develop a new mount type,named SFS-AGM-01adjustable mount racks.It is a solar bracket that can be applied to a wide range of applications,especially for the power plant which required an adjustment of mounting sloping angle.The maximum wind speed can be up to 35m/s for this projects.Best benefit for panel installed in portrait.


SFS-AGM-01 pv panel mount is composed of Al6005-T5 tubes and SS304 screws for whole mounting structures.It can be suitable for both flat rooftop and open ground with a certain ground clearance.


Share you here with the design of our mounting design as below for reference:

Any questions about SunRack solar mount,welcome to contact us with info@sunforson.com

hot products
  • Concrete base solar ground mounted

    SunRack Concrete Based Ground Mounting

    SunRack concrete base solar mounting is a highly versatile ground mounted solutions that can be widely applied in commercial and utility solar panel installation

  • Solar Panel Installation Mounting

    Solar Ballast Mounting System

    SunRack ballast mounting system adopts foldable triangular to save cost both on installation and transportation. Non-penetration to rooftop.

  • carport mounting structure

    Solar Car Park Mounting System

    SunRack solar car parking solar rack mount can be designed as single row and double row two version. It adopts triangle supporting structure technology, which is very strong and secure.

welcome to Sunforson
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
   

online service

home

products

about

contact