Solar bracket stand seam clamp accessories are widely used in the installation of rooftop photovoltaic power generation systems. Because of the different solar trapezoid roof structures, when choosing the fixtures connected to the solar mounting brackets, you must choose according to the different structures and specific distinctions.
1. The size of the cross-section of the T-shaped trapezoid roof should be measured accurately, in order to obtain the size of the photovoltaic trapezoidal fixture.
2. After designing the size of the trapezoidal fixture, the profile is drawn, and then processed by wire cutting. When drilling, it is best to match the special bolts for the trapezoidal fixture, so that the complete trapezoidal fixture is completed.
3. The solar trapezoid roof is connected with the guide rail through the trapezoidal fixture and bracket, so that the photovoltaic support system is firmly installed on the roof of the trapezoid roof.
4. In the installation process of the trapezoidal fixture, the two sides of the fixture are fixed with self-working screws and the color steel tiles. The trapezoidal fixture is also waterproofed with rubber pads between the color steel tiles. Finally, waterproof glue is applied to the screw holes to achieve waterproofing.
5. Through the connection and installation of the trapezoidal fixture, the photovoltaic bracket is generally installed on the roof of the color steel tile. Finally, the selected solar panel is installed and fixed by connecting with the photovoltaic bracket accessories, so that a complete set of color steel tile The power generation system of the fixture is installed.
6. There are many types of photovoltaic fixtures used in the installation of photovoltaic power generation on the trapezoid roof. The selection of photovoltaic fixtures is different for different roof structures. You can measure and produce according to the actual situation of your own roof.
Email:info@sunforson.com
Website:www.sunforson.com