Accordingly to our Europe client’s requests,our engineering team designs a new portable mounting systems SFS-BX-03 for his distributions.

This BX03 can be adjusted the tilt angle accordingly to installation requirements with adjustable hole positions.

The bolts used for the angle adjustable diagonal brace are butterfly bolts, which can be tightened manually.

Viewed from the back, the PV bracket is clean and tidy, and has a very linear sense. The bolt length at the hinge is also very appropriate.

From the side folding diagram, it can be seen that both adjustable leg groups are placed in the space between the battery panel frame and the base.

In this space, the height of the two corner aluminum does not exceed the height of the battery panel or base.

The butterfly bolts used in the adjustment leg group can also be locked on the base to prevent bolt loss.

From the picture, it can be seen that the lower adjusting arm will limit the rotation of the upper adjusting arm, which can prevent the adjusting arm from shaking out of bounds when walking with a hand.

Any questions about solar mounting solutions,welcome to contact Sunforson team by info@sunforson.com